Features:
- The X-Torq engine design increases torque over a wider rpm range providing maximum cutting power.
- The engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40%.
- Adjustable cutting bar for greater versatility and less tiring work.
-
Stop switch automatically resets to the ON position for trouble-free starting.
- The stand-alone starter makes it easy to change the starter cord if needed.
- The rear impact guard protects the engine from wear and damage.
- Cutter bar in transport mode for easy transport and storage.
- The choke and purge are easy to reach and understand.
- Fuel pump designed for easy starting.
Technical Specification:
- Cutting speed – 4300 cut/min
- Cylinder displacement – 25.4 см³
- Power output – 1 kW
- Maximum power speed – 8500 rpm
- Fuel tank volume – 0.5 l
- Fuel consumption – 0.6 kg/h
- Idling speed – 3000 rpm
- Spark plug – Husqvarna HQT-2
- Exhaust emissions (CO2 EU V) – 1141 g/kWh [1]
- Knife adjustment range, up/down Down – 90°
- Knife adjustment range, up/down Up – 45°
- Knife Length – 60 cm
- Teeth opening – 30 mm
- Weight – 5.9 kg
- Sound pressure level at operators ear – 96 dB(A)
- Sound power level, guaranteed (LWA) – 107 dB(A)
- Gear ratio – 1
- Equivalent vibration level (ahv, eq) front handle – 5.6 m/s²
- Equivalent vibration level (ahv, eq) rear handle – 4.4 m/s²
[1] This CO2 measurement results from testing over a fixed test cycle under laboratory conditions a(n) (parent) engine representative of the engine type (engine family) and shall not imply or express any guarantee of the performance of a particular engine.








Reviews
There are no reviews yet.